User Guide
Table Of Contents
- Your Guide to SpeakEasy
- Front Panel
- Top Panel
- Alarm:
- To set the alarm with the unit on, simply speak the command with the time you wish to wake, such as “Hey, Google, set the alarm for tomorrow at 7am.” The alarm time will appear for 5 seconds. If you change your mind, you can say “Hey, Google, cancel t...
- Warranty
- Specifications:
- Model name: SpeakEasy by Como Audio
- Google, Google Home, Android, Google Play, Chromecast built-in and other related marks and logos are trademarks of Google LLC.
- Controlling other devices in your home requires compatible products.
- Thompson Licensing: MP3 audio decoder
- Fraunhofer: MPEG-4 HE & LC AAC Audio decoder
- For FAQs, help videos, blog articles, and instruction manuals, please visit: www.comoaudio.com
- Important Safety Instructions
2
Your Guide to SpeakEasy
Front Panel
1. Power/Volume/Play/Pause: When plugged in, push in briefly to Play/Pause while
music is playing. Rotate to adjust the volume. When operating on battery power-
only, push in briefly to turn on; Press and hold to turn off. You can also ask
SpeakEasy to adjust the voume, such as “Hey Google, play it louder.”
2. Microphone: Press briefly to mute the microphones. The Assistant LEDs will turn
amber. Press again to unmute the microphones.
3. Bluetooth: Press briefly to place in Bluetooth mode; Press and hold to discover new
Bluetooth devices. Open Bluetooth on your source device and search/scan for the
“CA SpeakEasy” name, then pair and connect. Once you’ve paired you shouldn’t
need to do it again. If your source device prompts you to enter a passcode, enter
“0000”. Adjust the volume as desired.
4. Assistant LEDs: The 4 white LEDs will flash whenever Speakeasy is “thinking”. The
LEDs will change to amber color whenever the microphones are muted or during a
Factory Data Reset (refer to the Rear Panel section). The LEDs will flash blue in
Bluetooth mode.
EN