User Guide

Rest your palm on the top of the cabinet and insert your fingers inside the port to
1. Reset button: Press and hold for 5 seconds to perform a power cycle if you encounter a problem. The time
will reset to zero and default to the 12-hour time format.
2. 18V/2.8A DC power input: Connect the included external Como Audio power supply to this input for power
and to charge the battery (not included). Attach the appropriate included snap-in plug to the power supply for
your region. If the power supply is ever lost or damaged, use only a like replacement.
The adapter connector is center positive.
3. Auxiliary input: Connect the analog audio out from another
device such as a CD player or MP3 player. This input accepts a
3.5mm connector. An adapter cable is included if converting a
stereo RCA audio cable such as the cable included with the
Como Audio Turntable. Push the source knob briefly to switch
from Bluetooth mode to Aux mode. The LEDs will change from
blue to green. Push the Source knob again briefly to return to
Bluetooth mode.
4. Headphone output: Connect a set of stereo headphones.
The primary speakers will be muted. Adjust the volume as
needed. This output accepts a 3.5mm stereo connector.
5. Bass control: Rotate right for more bass. Rotate left for less
bass. The center detent is the recommended setting. The
frequencies impacted by the bass control are roughly
60Hz-150Hz.
6. Speaker output: Connect the wired Como Blu Speaker’s
audio cable to this right channel output. Use only the Como
Audio Blu Speaker with this output. See “Mono/Stereo switch”.
SPE AKERBAS S MON O/STE REO
Co mo Bl ue to oth
2A MWR BT
Com o
7. Mono/Stereo switch: Keep this switch in the Stereo position unless the Como Blu Speaker is not being used,
in which case it should be set to Mono. In the stereo configuration, Como Blu will reproduce the left channel
only and the Como Blu Speaker will reproduce the right channel only. Accordingly, it is suggested to position
the Como Blu Speaker on the right side. The more distance between the two speakers, the better the channel
separation and the wider the soundstage.
8. Battery compartment: Accepts the optional 2200mA 14.8V custom Li-Ion battery pack. Use only a genuine
Como Audio battery pack, as unauthorized batteries could pose a fire risk and are not covered under warranty.
The LEDs above the display will cycle whenever the battery pack is charging. See the section marked “Battery
Pack”.
9. Bass Port/Carry Handle:
carry. Do not obstruct the bass port otherwise.
For more detailed instructions, download the complete Como Blu owner’s manual from our website:
www.comoaudio.com/support/owners-manual/
Questions? Contact us at [e-mail] or 1.844.644.8606
1. Mute: Press briefly to mute the audio. The LEDs
will flash amber. Press again to unmute.
TOP
BACK