Installation Manual

INS_RLXE4GE24MODMS_REV– 1 Jul 2016 PAGE 96
INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
RADIUS Accounting Servers
Label Description
# The RADIUS server number. Click to navigate to detailed statistics for this server.
IP Address The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this
server.
Status The current status of the server. This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept accounting attempts.
Dead (X seconds left): Accounting attempts were made to this server, but it did not
reply within the configured timeout. The server has temporarily been disabled, but will
get re-enabled when the dead-time expires. The number of seconds left before this
occurs is displayed in parentheses. This state is only reachable when more than one
server is enabled.
RADIUS Details
The statistics map closely to those specified in RFC4668 – RADIUS Authentication Client MIB.
Use the server select box to switch between the backend servers to show details for.
The statistics map closely to those specified in RFC4668 – RADIUS Authentication Client MIB.
Use the server select box to switch between the backend servers to show details for.