Installation Manual

INS_RLXE4GE24MODMS_REV– 1 Jul 2016 PAGE 95
INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
RADIUS Overview
This page provides an overview of the status of the RADIUS servers configurable on the
Authentication configuration page.
RADIUS Authentication Servers
Label Description
# The RADIUS server number. Click to navigate to detailed statistics for this server.
IP Address The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this
server.
Status The current status of the server. This field takes one of the following values:
Disabled: The server is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running.
Ready: The server is enabled, IP communication is up and running, and the RADIUS
module is ready to accept access attempts.
Dead (X seconds left): Access attempts were made to this server, but it did not reply
within the configured timeout. The server has temporarily been disabled, but will get
re-enabled when the dead-time expires. The number of seconds left before this occurs
is displayed in parentheses. This state is only reachable when more than one server is
enabled.