Installation Manual

INS_RLXE4GE24MODMS_REV– 1 Jul 2016 PAGE 81
INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
QoS Control List
This page allows to edit|insert a single QoS Control Entry at a time. A QCE consists of several
parameters. These parameters vary according to the frame type that you select.
Label Description
Port Members Check the checkbox button to include the port in the QCL entry. By default all ports
are included.
Key Parameters Key configuration is described as below:
Tag Value of Tag field can be ‘Any’, ‘Untag’ or ‘Tag’.
VID Valid value of VLAN ID can be any value in the range 1-4095 or ‘Any’; user can
enter either a specific value or a range of VIDs.
PCP Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1,
2-3, 4-5, 6-7, 0-3, 4-7) or ‘Any’.
DEI Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or ‘Any’.
SMAC Source MAC address: 24 MS bits (OUI) or ‘Any’.
DMAC Type Destination MAC type: possible values are unicast(UC), multicast(MC),
broadcast(BC) or ‘Any’.
Frame Type Frame Type can have any of the following values:
1. Any
2. Ethernet
3. LLC
4. SNAP
5. IPv4
6. IPv6
Note: All frame types are explained below.
1. Any Allow all types of frames.