Installation Manual

INS_RLXE4GE24MODMS_REV– 1 Jul 2016 PAGE 78
INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
Port Shaping
This page provides an overview of QoS Egress Port Shapers for all switch ports.
Label Description
Port The logical port for the settings contained in the same row.
Click on the port number in order to configure the shapers.
Mode Shows “disabled” or actual queue shaper rate – e.g. “800 Mbps”.
Qn Shows “disabled” or actual port shaper rate – e.g. “800 Mbps”.
DSCP Based QoS
This page allows you to configure the basic QoS DSCP based QoS Ingress Classification settings
for all switches.
Label Description
DSCP Maximum number of supported DSCP values are 64.
Trust Controls whether a specific DSCP value is trusted. Only frames with trusted DSCP
values are mapped to a specific QoS class and Drop Precedence Level. Frames with
untrusted DSCP values are treated as a non-IP frame.
QoS Class QoS class value can be any of (0-7)
DPL Drop Precedence Level (0-1)