Installation Manual

INS_RLXE4GE24MODMS_REV– 1 Jul 2016 PAGE 75
INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
Port DSCP
This page allows you to configure the basic QoS Port DSCP Configuration settings for all switch ports.
Label Description
Port The Port column shows the list of ports for which you can configure dscp ingress and
egress settings.
Ingress In Ingress settings you can change ingress translation and classification settings for
individual ports.
There are two configuration parameters available in Ingress:
1. Translate
2. Classify
1. Translate To Enable the Ingress Translation click the checkbox.
2. Classify Classification for a port have 4 different values.
• Disable: No Ingress DSCP Classification.
• DSCP=0: Classify if incoming (or translated if enabled) DSCP is 0.
• Selected: Classify only selected DSCP for which classification is enabled as specified
in DSCP Translation window for the specific DSCP.
• All: Classify all DSCP.