Manualshelf

Installation Manual

ManualsBrandsComnet ManualsComputers & AccessoriesHigh Voltage Power Supply Module
121122123124125126127128129130
INS_RLXE4GE24MODMS_REV– 1 Jul 2016 PAGE 126
INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
CLI Management by Telnet
Users can use “TELNET” to configure the switches.
The default value is as below:
IP Address: 192.168.10.1
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.10.254
User Name: admin
Password: admin
Follow the steps below to access the console via Telnet.
Step 1. Telnet to the IP address of the switch from the Windows Run command (or from the
MS-DOS prompt) as below.
Step 2. The Login screen will appear. Use the keyboard to enter the Username and Password (The
same with the password for Web Browser), and then press Enter