Installation Manual

INS_RLXE4GE24MODMS_REV– 1 Jul 2016 PAGE 120
INSTALLATION AND OPERATION MANUAL RLXE4GE24MODMS
TECH SUPPORT: 1.888.678.9427
Syncronization-PTP
This page allows the user to configure and inspect the current PTP clock settings.
PTP External Clock Mode
Label Description
One_pps_mode This Selection box will allow you to select the One_pps_mode configuration.
The following values are possible:
1. Output : Enable the 1 pps clock output
2. Input : Enable the 1 pps clock input
3. Disable : Disable the 1 pps clock in/out-put
External Enable This Selection box will allow you to configure the External Clock output.
The following values are possible:
1. True : Enable the external clock output
2. False : Disable the external clock output
VCXO_Enable This Selection box will allow you to configure the External VCXO rate adjustment.
The following values are possible:
1. True : Enable the external VCXO rate adjustment
2. False : Disable the external VCXO rate adjustment
Clock Frequency This will allow to set the Clock Frequency.
The possible range of values are 1 – 25000000 (1 – 25MHz)