Data Sheet

16 Aug 2016
© 2016 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
RLXE4GE24MODMS
ORDERING INFORMATION
Part Number Description Compatible Slots
RLXE4GE24MODMS/CHASSIS 4 Slot 10 Gigabit Managed Layer 2/3 Switch (Rear Panel Power Connections) - No PSUs or Modules included n/a
RLXE4GE24MODMS/CHASSIS/FP 4 Slot 10 Gigabit Managed Layer 2/3 Switch (Front Panel Power Connections) - No PSUs or Modules included n/a
RLXE4GE24MODMS/LVPSU Low Voltage Power Supply Module, 24/48 VDC (20~72 VDC) - PSU Only (1 or 2 Per Chassis) PSU 1 or 2
RLXE4GE24MODMS/HVPSU High Voltage Power Supply Module, 88~264 VAC / 100~370 VDC - PSU Only (1 or 2 Per Chassis) PSU 1 or 2
RLXE4GE24MODMS/XE2SFP Industrial 2 × 10GBase-X SFP+ ports - Module Only (requires purchase of SFP+ modules)¹ Slot 4
RLXE4GE24MODMS/XE4SFP Industrial 4 × 10GBase-X SFP+ ports - Module Only (requires purchase of SFP+ modules)¹ Slot 4
RLXE4GE24MODMS/GE2SFP Industrial 2 × 1000Base-X SFP ports - Module Only (requires purchase of SFP modules)¹ Slot 4
RLXE4GE24MODMS/GE4SFP Industrial 4 × 1000Base-X SFP ports - Module Only (requires purchase of SFP modules)¹ Slot 4
RLXE4GE24MODMS/8TX Industrial 8 × 10/100/1000Base-T(X) ports - Module Only Slots 1-3
RLXE4GE24MODMS/8SFP Industrial 8 × 100/1000Base-X SFP ports - Module Only (requires purchase of SFP+ modules)¹ Slots 1-3
RLXE4GE24MODMS/GE4SCM2 Industrial 4 × 1000Base-FX Multimode SC Fiber ports - Module Only² Slots 1-3
RLXE4GE24MODMS/FE4SCM2 Industrial 4 × 100Base-FX Multimode SC Fiber ports - Module Only² Slots 1-3
RLXE4GE24MODMS/GE4SCS2 Industrial 4 × 1000Base-FX Singlemode SC Fiber ports - Module Only² Slots 1-3
RLXE4GE24MODMS/FE4SCS2 Industrial 4 × 100Base-FX Singlemode SC Fiber ports - Module Only² Slots 1-3
RLXE4GE24MODMS/GE4STM2 Industrial 4 × 1000Base-FX Multimode ST Fiber ports - Module Only² Slots 1-3
RLXE4GE24MODMS/FE4STM2 Industrial 4 × 100Base-FX Multimode ST Fiber ports - Module Only² Slots 1-3
RLXE4GE24MODMS/GE4STS2 Industrial 4 × 1000Base-FX Singlemode ST Fiber ports - Module Only² Slots 1-3
RLXE4GE24MODMS/FE4STS2 Industrial 4 × 100Base-FX Singlemode ST Fiber ports - Module Only² Slots 1-3
Options Low Voltage Industrial Power Supply (24 or 48 VDC) (Optional)
User-selectable SFP Modules¹ (Extra charge, consult factory)
[3] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651. Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
[2] This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is
recommended. Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J.
APPLICATION DRAWING
Fully Modular, Substation-Rated, All-Gigabit Layer 2 Switch/Layer 3
Router, With 1000 Mbps or 10 Gigabit SFP Uplink Ports
RLXE4GE24MODMSRLXE4GE24MODMS
RLXE4GE24MODMS
RLXE4GE24MODMS
RLXE4GE24MODMS
RLXE4GE24MODMS
Electrical Substation SCADA Network using RLXE4GE24MODMS
Central Control
& Monitoring Center
Precision Timing Required
RTU
RTU IED
IED
RTUMetering IP Camera
IP Camera
IEEE 1588v2
IED
IEEE 1588v2
IED
Metering
Protective Relay
Protective Relay
Protective RelayProtective Relay Synchrophasor
Synchrophasor
Substation A
Substation B
RLXE4GE24MODMS
Substation C
System Control
& Monitoring
Engineering
Access
Enterprise
Access