Data Sheet

RLXE4GE24MODMS
Fully Modular, Substation-Rated, All-Gigabit Layer 2 Switch/Layer 3
Router, With 1000 Mbps or 10 Gigabit SFP Uplink Ports
SPECIFICATIONS
Power
Redundant power input LV PSU: 24/48 VDC, 20 to 72 VDC power inputs
HV PSU: 88~264VAC / 100~370VDC power inputs
Power connections are on rear of chassis as
standard. For front panel power connections please
order /FP chassis option
Power Consumption 46 W Max
Overload Current Protection Present
Mechanical
Fault Contact Relay Relay output to carry capacity of 1A at 24 VDC
Indicating LEDs System Ready Indicator (PWR)
Power Indicator (PWR1 / PWR2)
Ring Master Indicator (R.M.)
Fault Indicator (Fault)
Reset To Default Running Indicator (DEF)
Supervisor Login Indicator (RMT)
Link/Act(LINK)
Speed(SPD)
Duplex(FDX)
Remote (RMT)
Port 1 ~ 28 Link/Act(LK/ACT)
Enclosure 19“ rack mountable chassis
Size 17.32 × 12.8 × 1.73 in (44 × 32.5 × 4.4 cm)
Weight 1.42 lb / 6.45 kg
Environmental
MTBF > 250,000 hours
Storage Temperature -40º to +85ºC
Operating Temperature -40º to + 85ºC
-40º to +75ºC when “XE” modules are in use
Operating Humidity 5 to 95% Non-condensing³
Compliance
Traffic Control NEMA TS-1, NEMA TS-2
Power Automation IEC 61850-3; IEEE 1613, Class 2
EMI FCC Part 15, CISPR (EN55022) class A, EN50155
(EN50121-3-2, EN55011, EN50121-4)
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS),
EN61000-4-4 (EFT), EN61000-4-5 (Surge),
EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Connectors
RS232 Console RS-232 in RJ-45 Connector with Console cable
115200 bps, 8, N, 1
Power Screw Terminal
Fault Relay Screw Terminal
RLXE4GE24MODMS/XE2SFP¹ 2 × SFP+
RLXE4GE24MODMS/XE4SFP¹ 4 × SFP+
RLXE4FE24MODMS/GE2SFP 2 × SFP
RLXE4GE24MODMS/GE4SFP 4 × SFP
RLXE4GE24MODMS/8TX 8 × RJ-45
RLXE4GE24MODMS/8SFP¹ 8 × SFP
RLXE4GE24MODMS/GE4SCM2 4 × Duplex SC²
RLXE4GE24MODMS/FE4SCM2 4 × Duplex SC²
RLXE4GE24MODMS/GE4SCS2 4 × Duplex SC²
RLXE4GE24MODMS/FE4SCS2 4 × Duplex SC²
RLXE4GE24MODMS/GE4STM2 4 × Duplex ST²
RLXE4GE24MODMS/FE4STM2 4 × Duplex ST²
RLXE4GE24MODMS/GE4STS2 4 × Duplex ST²
RLXE4GE24MODMS/FE4STS2 4 × Duplex ST²
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.z for 1000Base-X
IEEE 802.3ae for 10Gigabit Ethernet
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
A
GENCY COMPLIANCE
AGENCY COMPLIANCE
APPLICATIONS
› Electrical substation SCADA and distribution automation
networks; protective relaying systems; power transmission
& distribution systems; remote/unattended wind farm,
hydroelectric, and solar/photovoltaic power generation
facilities; and other electrical utility-specific applications
› NERC-CIP-014 compliance for perimeter security,
surveillance monitoring, and controlled access to electrical
substations and power generating facilities, and other critical
infrastructure/high value, mission-critical sites and assets
› Industrial/Factory Automation & Process Control SCADA
Networks
› Chemical and petrochemical refining and processing
facilities, oil and gas pipelines/transmission systems, and
mining installations
› Food processing/pharmaceutical manufacturing facilities,
Wastewater treatment plants, and suppliers of potable
drinking water
› ITS/transportation closed-loop signalization and VMS/VDS/
surveillance/incident detection systems
› Railway/trackside control and monitoring system
› Military, government, and defense communications networks
› Integrated IP-video, VOIP, and data transmission networks
› Cellular telephony and wireless backhaul networks
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427