Spec Sheet
10 May 2018© 2018 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
INFO@COMNET.NET
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: +44 (0)113 307 6400
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET
RLMC100X(M,S)2
Electrical Substation-Rated 10/100 Mbps Ethernet
Electrical To Optical Media Converter
SPECIFICATIONS
Data
Compliance IEEE 802.3
IEEE 802.3ab
IEEE802.3z
IEEE 802.3u
Ethernet Data Interface Electrical: 10/100BASE-TX, half or full-duplex.
Optical: 100BASE-FX, full-duplex
Connectors
Optical 2 Fiber ST or SC, 1310 nm wavelength
Power 4-Position Screw Terminal Block
Ethernet RJ45
Fault Relay 3-Position Screw Terminal Block
Summary Fault Alarm
Form C contacts for local or remote indication of loss of operating power, or loss
of optical link
Relay Contacts: Rated at 110 VDC @ 0.25A, non-inductive load; or
125 VAC @ 0.3A, non-inductive load
Power
Power Consumption 5 W (max)
12 to 24DC models 9 to 36 VDC (max)
48DC models 36 to 59 VDC (max)
HV AC/DC models 88 to 300 VDC, or 85 to 264 VAC (max)
12 to 24 VDC & 48 VDC versions feature redundant and floating DC inputs, for
use in positive or negative grounding arrangements
Current Protection Automatic Resettable Solid-State Current Limiters
Mechanical
Indicator LEDs - Operating Power
- Fault
- Optical Link/Activity
Housing 19-Gauge galvanized steel, power-coated finish
Ingress Protection Rating IP-30
Mounting Standard DIN-Rail or panel-mount. Panel-
mounting adapter included.
Housing Dimensions 4.3 × 2.3 × 3.7 in (10.9 × 5.8 × 9.4 cm)
Weight (unpacked) 1.5lbs (0.68kg)
Circuit Board Meets IPC standards
Environmental
MTBF >250,000 hours
Operating Temperature -40˚C to +85˚C
Storage Temperature -40˚C to +85˚C
Operating Humidity 5% to 95% (Non-condensing)¹
Applicable EMI Immunity and Environmental Standards
IEC 61850-3 for Electrical Utility Substations
IEEE 1613, Class 2 for Electrical Utility Substations
EN50155 for Railway Applications
EN50121-4 for Railway Applications
NEMA TS-1/TS-2 For Traffic Signal Control Equipment
A
GENCY COMPLIANCE
ORDERING INFORMATION
Part Number Description Fiber
Optical Pwr
Budget
Max
Distance
RLMC1005M2/24DC Substation-Rated 10/100 Mbps Ethernet, ST, redundant 12 to 24 VDC inputs Multimode 10 dB 3 km (2 mi)
RLMC1005S2/24DC Substation-Rated 10/100 Mbps Ethernet, ST, redundant 12 to 24 VDC inputs Singlemode 15 dB 20 km (12 mi)
RLMC1005M2/48DC Substation-Rated 10/100 Mbps Ethernet, ST, redundant 36 to 59 VDC inputs Multimode 10 dB 3 km (2 mi)
RLMC1005S2/48DC Substation-Rated 10/100 Mbps Ethernet, ST, redundant 36 to 59 VDC inputs Singlemode 15 dB 20 km (12 mi)
RLMC1005M2/HV Substation-Rated 10/100 Mbps Ethernet, ST, redundant 88 to 300 VDC, or 85 to 264 VAC inputs Multimode 10 dB 3 km (2 mi)
RLMC1005S2/HV Substation-Rated 10/100 Mbps Ethernet, ST, redundant 88 to 300 VDC, or 85 to 264 VAC inputs Singlemode 15 dB 20 km (12 mi)
RLMC1003M2/24DC Substation-Rated 10/100 Mbps Ethernet, SC, redundant 12 to 24 VDC inputs Multimode 10 dB 3 km (2 mi)
RLMC1003S2/24DC Substation-Rated 10/100 Mbps Ethernet, SC, redundant 12 to 24 VDC inputs Singlemode 15 dB 20 km (12 mi)
RLMC1003M2/48DC Substation-Rated 10/100 Mbps Ethernet, SC, redundant 36 to 59 VDC inputs Multimode 10 dB 3 km (2 mi)
RLMC1003S2/48DC Substation-Rated 10/100 Mbps Ethernet, SC, redundant 36 to 59 VDC inputs Singlemode 15 dB 20 km (12 mi)
RLMC1003M2/HV Substation-Rated 10/100 Mbps Ethernet, SC, redundant 88 to 300 VDC, or 85 to 264 VAC inputs Multimode 10 dB 3 km (2 mi)
RLMC1003S2/HV Substation-Rated 10/100 Mbps Ethernet, SC, redundant 88 to 300 VDC, or 85 to 264 VAC inputs Singlemode 15 dB 20 km (12 mi)
Options [1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
Add ‘/HP’ for 24 dB Optical Power Budget and 60 km Max Distance
Note: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.