Data Sheet
specifications
02.01.12© 2012 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | INFO@COMNET.NET
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: +44 (0)113 307 6400 | F: +44 (0)113 253 7462 | INFO-EUROPE@COMNET.NET
DERATING DIAGRAM
PIN # DESIGNATION DESCRIPTION
1 + Positive output terminal
2 + Positive output terminal
3 - Negative output terminal
4 - Negative output terminal
5 GND Ground terminal to minimise High frequency emissions
6 L Phase input ( no polarity with DC input )
7 N Neutral input ( no polarity with DC input )
DC ON DC output ready LED
DC LO DC low indicator LED
Vout ADJ. Trimmer for fine output voltage adjustment
S/P Single parallel selection switch
Switching Mode Power Supply 480 watt DIN-rail
mounting for Power Over Ethernet (POE) ApplicationsPS48VDC-10A
PIN ASSIGNMENT AND FRONT CONTROLS
INSTALLATION
COOLING Natural air convection
Allow 25mm of free space along all sides to
ensure adequate cooling
SCREW CONNECTIONS 10-24AWG Flexible or solid cable
PLUG IN CONNECTORS 10-24AWG Flexible or solid cable
NOTE: Specify desired connector style at time of order.
OUTLINE DRAWING
Specifications are subject to change without notice.