Data Sheet

specifications
WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
Switching Mode Power Supply 480 watt DIN-rail
mounting for ComNet™ CNGE2FE24MSPOE
CODE
Plug-in connectorsB
DESCRIPTION
PS48VDC-10A
OUTPUT DATA
Line regulation ± 0.5%
Load regulation, Non-parallel mode ± 0.5%
Load regulation, Parallel mode ± 5%
Ouput Voltage accuracy +1% (factory adjusted)
Ripple and Noise 100 mV
Hold up time Vi = 230Vac 30 ms
Minimum load 0%
Parallel Operation 3 units max.
INPUT DATA
Rated input voltage range
AC 90 - 264 Vac
DC 120 - 370 Vdc
Rated input current (115/230 VAC) 7 / 3.5A
Frequency range 47- 63 Hz
Inrush current
Vi= 115Vac 25A
Vi= 230Vac 50A
OPTIONAL FEATURES
CONTROLS AND PROTECTIONS
Input Fuse T10A/250Vac internal*
Output Overvoltage Protection 57 – 63VDC
Output Short Circuit Protection Current limit
Rated Overload Protection 120-140%
GENERAL DATA
(@ NOMINAL LINE, FULL LOAD, 25ºC)
Ambient operating temperature -25°C to 71°C
Derating (>56°C to +71°C) 2.5%/°C
Ambient humidity 20 - 95%RH, non-condensing
Storage -25°C to +85°C
Dimensions L × W × D screw terminal connector: 12.5 × 17.5 × 12.3 cm
4.9 × 6.9 × 4.8 in
plug connector version: 14.2 × 17.5 × 12.3 cm
5.6 × 6.9 × 4.8 in
Cooling Natural convection
Case material Aluminium, Powder Coat Finish
Weight < 1.9 Kg (4.3 lbs)
Protection IP20
APPROVALS AND EMC COMPLIANCE
†
Insulation voltage I/O 3.000Vac
Insulation resistance I/O @ 500VDC 100Mohm
UL / cUL UL508 listed, UL60950-1, Recognised
TUV EN60950-1
CE EN61000-6-3
EN55022 class B
EN61000-3-2
EN61000-3-3
EN61000-6-2
EN55024
* When S/P switch is set to parallel, it is not possible to trim output voltage.
†
For complete compliance information contact ComNet for manufacturer’s data sheet.