Data Sheet

3 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
PS-AMR Series
Industrial DIN Rail Mounting 12 or 24 Volt Power Supplies
SPECIFICATIONS
All Specifications Typical at Nominal Line, Full Load, 25ºC Unless Otherwise Noted
Power Input
Rated Input Voltage 90 to 264 VAC or 120 to 375 VDC
Input Current 115 / 230 VAC
PS-AMR1-12: 200 / 135 mA
PS-AMR2-12: 450 / 270 mA
PS-AMR3-12: 680 / 410 mA
PS-AMR4-12: 1.1 / 0.6 A
PS-AMR5-12: 1.35 / 0.72 A
PS-AMR1-24: 1.35 / 0.72 A
PS-AMR2-24: 450 / 270 mA
PS-AMR3-24: 680 / 410 mA
PS-AMR5-24: 1.8 / 0.9 A
PS-AMR4-24: 1.1 / 0.6 A
Line Frequency 47 to 63 Hz
Inrush current 115 / 230 VAC
PS-AMR1: 15 / 30 A
PS-AMR2: 20 / 40 A
PS-AMR3: 25 / 50 A
PS-AMR4/5: 30 / 60 A
Power Dissipation 230 VAC
PS-AMR1-12: 2.3 W
PS-AMR2-12: 4.3 W
PS-AMR3-12: 7.3 W
PS-AMR4-12: 10.2 W
PS-AMR5-12: 12. 9 W
PS-AMR1-24: 2.3 W
PS-AMR2-24: 4.0 W
PS-AMR3-24: 7.1 W
PS-AMR424: 9.9 W
PS-AMR5-24: 12. 2 W
Power Input
Voltage Accuracy +1%
Minimum Load 0%
Line Regulation ±1%
Voltage Trim Range For all except the PS-AMR1 models
12 V: 12 to 14 VDC
24 V: 24 to 28 VDC
Hold up time 115 / 230 VAC
PS-AMR1: 10 / 30 ms
PS-AMR2: 20 / 80 ms
PS-AMR3: 20 / 100 ms
PS-AMR4-12: 16 / 60 ms
PS-AMR5-12: 16 / 60 ms
PS-AMR4-24: 12 / 60 ms
PS-AMR5-24: 10 / 60 ms
DC ON / LOW
indicator threshold 12 V: 9 to 10.8 VDC
24 V: 19.2 to 21.6 VDC
General
Isolation Resistance Input-Output, @ 500VDC, 100 MΩ
Derating PS-AMR1/2/5: +61º to 71ºC, max 2.5% / ºC
PS-AMR3/4: +56º to 71ºC, max 2.5% / ºC
Cooling Normal convection
(Recommend all sides 25m/m free space)
Control and Protection
Input fuse 250 VAC internal
PS-AMR1: T1A
PS-AMR2/3/4: T2A
PS-AMR5: T3.15A
Internal Surge Protection IEC 61000-4-5
Rated Over Load Protection PS-AMR1: 110 - 165 %
PS-AMR2: 120 - 160 %
PS-AMR3/4/5: 110 - 150 %
Over voltage protection Auto Recovery
12 V: 15 to 16.5 VDC
24 V: 30 to 33 VDC
Degree of protection IP20
Connector
AWG24-12 (0.2 - 2.5mm²) flexible / solid cable
Indicating LEDs
DC ON At Start Up (Green)
DC LOW After Start Up (Red)
Electrical & Mechanical
Size PS-AMR1 3.58 × 0.71 × 2.22 in (9.1 × 1.8 × 5.65 cm)
PS-AMR2 3.58 × 1.38 × 2.22 in (9.1 × 3.5 × 5.65 cm)
PS-AMR3 3.58 × 2.09 × 2.22 in (9.1 × 5.3 × 5.65 cm)
PS-AMR4 3.58 × 2.8 × 2.22 in (9.1 × 7.1 × 5.65 cm)
PS-AMR5 3.58 × 3.54 × 2.24 in (9.1 × 9.0 × 5.7 cm)
Weight PS-AMR1 0.14 lb / 65 g
PS-AMR2 0.29 lb / 130 g
PS-AMR3 0.42 lb / 190 g
PS-AMR4 0.55 lb / 250 g
PS-AMR5 0.84 lb/ 380 g
Environmental
MTBF >500,000 hours @ 40ºC
Operating Temp -40˚ C to +71˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 20% to 90% (non-condensing)
Approvals & EMC Compliance
UL / cUL UL 508 Listed
UL 60950-I, UL 1310 Class 2 Power (24LS model
only) recognized
ISA 12.12.01 (Class I, Div 2, Groups A, B, C, & D)
TUV EN 60950-I, CB scheme
CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2,
EN 61000-3-3, EN 61000-6-2, EN 55024,
EN 61000-4-2 Level 4, EN 61000-4-3 Level 3,
EN 61000-4-4-4 Level 4, EN 61000-4-5 L-N Level 3,
EN 61000-4-6 Level 3, EN 61000-4-8 Level 4,
EN 61000-4-11, ENV 50204 Level 2, EN 61204-3
Vibration Meets IEC 60068-2-6
Rail Mount: 10 - 500 Hz, 2G, 60 min for each Axis
Shock Meets IEC 60068-2-27
15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face