Data Sheet

3 YEAR WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› Universal AC input: 90 to 264 VAC, 47-63Hz

› Mounts on standard 7.5 or 15 mm DIN-rail

› Adjustable output voltage range support

› High operating efficiency; up to 89%

› Small package for limited space installations

› Natural convection cooling; no troublesome fans

› Wide operating temperature range: -40º to +71º C

› 3 Year Warranty

APPLICATIONS

› Power Supplies for ComNet Industrial Products

The ComNet

™

PS-AMR Series offer a complete range of high quality, low noise

switching mode power supplies of various output sizes ideally suited to the

entire ComNet industrial product range that require either 12 or 24VDC power

input. These rugged units are DIN rail mountable, providing an ideal mounting

configuration to a mating ComNet industrial switch or any product using our range

of DIN rail mounting adapters. The wide ambient operating temperature range

permits installation in most out of plant and unconditioned environments, such as

those found in intelligent transportation systems or factory automation/industrial

control applications. Unconditional line and load protection is provided.

PS-AMR Series

Industrial DIN Rail Mounting 12 or 24 Volt Power Supplies

DIN RAILHARDENED12 OR 24 V

PAGE 1
Industrial DIN Rail Mounting 12 or 24 Volt Power Supplies PS-AMR Series 12 OR 24 V HARDENED DIN RAIL The ComNet™ PS-AMR Series offer a complete range of high quality, low noise switching mode power supplies of various output sizes ideally suited to the entire ComNet industrial product range that require either 12 or 24VDC power input.
PAGE 2
PS-AMR Series Industrial DIN Rail Mounting 12 or 24 Volt Power Supplies SPECIFICATIONS All Specifications Typical at Nominal Line, Full Load, 25ºC Unless Otherwise Noted Power Input Rated Input Voltage 90 to 264 VAC or 120 to 375 VDC Input Current 115 / 230 VAC PS-AMR1-12: 200 / 135 mA PS-AMR2-12: 450 / 270 mA PS-AMR3-12: 680 / 410 mA PS-AMR4-12: 1.1 / 0.6 A PS-AMR5-12: 1.35 / 0.72 A PS-AMR1-24: 1.35 / 0.72 A PS-AMR2-24: 450 / 270 mA PS-AMR3-24: 680 / 410 mA PS-AMR5-24: 1.8 / 0.9 A PS-AMR4-24: 1.1 / 0.
PAGE 3
Industrial DIN Rail Mounting 12 or 24 Volt Power Supplies PS-AMR Series PIN ASSIGNMENTS PS-AMR1 PS-AMR2/3/4/5 PIN Designation IN 3 Negative output terminal 1 - Negative output terminal + Positive output terminal 2 - Negative output terminal L Input terminals (phase conductor, no polarity at DC input) 3 + Positive output terminal N Input terminals (neutral conductor, no polarity at DC input) 4 + Positive output terminal DC ON Operation indicator LED 5 L Input terminals (phase co