Data Sheet

03 Nov 2015© 2015 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
PIM1
Passive Power Over Ethernet (PoE)
Midspan Injector For 10/100TX
SPECIFICATIONS
Connectors
RJ45 Data In/Out Data/signal pairs pin 1,2,3,6
RJ45 Power Out Power over spare wire pairs pin: 4,5(V+), 7,8(V-)
Network Cable
10BASE-T UTP/STP CAT-3,4,5 cable
EIA/TIA-568 100 ohm (100m)
100BASE-TX: UTP/STP CAT-5 cable
EIA/TIA568 100 ohm (100 m)
Power
Power Consumption 30 W Max
Input Power Supply 12 to 48 VDC or 24 VAC
Power Output Same Voltage As Input (0.625 A Max)
Mechanical
Indicator LED Power
Circuit Board Meets IPC Standard
Size 2.3 × 1.6 × 1.1 in (5.7 × 4.1 × 2.8 cm)
Shipping Weight <1 lb./0.45 kg
Environmental
MTBF >100,000 Hours
Operating Temperature -40ºC to +75ºC
Storage Temperature -40ºC to +85ºC
Operating Humidity 0% to 95% (non-condensing)¹
Ethernet Standards
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
Approvals and EMC Compliance
EMI FCC Class B, CE
Safety UL, cUL, CE/EN60950-1
ORDERING INFORMATION
Part Number Description
PIM1 Passive Power over Ethernet industrial midspan injector
Options Power Supply (Extra charge, consult factory for suitable power supply for your application)
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT4)
TYPICAL APPLICATION
PIM1
Passive Power
Injector
PoE Powered Device
E
E
* Output voltage is the same
as input voltage
PoE
Power
Legend
Cat-5 Cable
PoE Power*
SPECIFICATIONS