Data Sheet

FEATURES
› Easily Combines Operating Power and 10/100TX Ethernet
Data to One Network Cable
› Powered by an external 12-48VDC or 24VAC power supply
to provide flexible operating power for non-standard PoE
devices
› Rugged, Compact Package for Installation Where Space
May Be Limited
› Ease of Installation & True Plug-and-Play Operation:
No User Configuration or Settings Required
› UL, CUL, FCC, CE, EN60950-1, and RoHS Approved
› Lifetime Warranty
APPLICATIONS
› Remote Operating Power for IP CCTV Cameras for Security
and Surveillance Systems
› Remote Operating Power for Voice over IP (VOIP)
Telephony Networks
› Remote Operating Power for Wireless LAN Access Points
› Industrial Security, Transportation/ITS, and Industrial
Control/Factory Automation IP Networks
The ComNet PIM1 is a low-cost industrial passive power over Ethernet (PoE)
midspan injection module that injects a passive voltage of 12 to 48 VDC at up to
0.625 amperes to the unused pairs of any UTP or STP CAT-3, CAT-4, or CAT-5
network cable. Operating power and 10/100TX Ethernet data are easily combined
on one cable, eliminating the need to install additional power outlets and electrical
cabling. Housed in a compact, rugged, light-weight package, the unit is powered
by a customer furnished power supply. The PIM1 provides passive power at the
same voltage level as the input power supply and can be used to power any devices
that do not require IEEE 802.3af/at negotiation such as many legacy PoE devices.
Transmission distances of up to 330 feet (100 meters) are supported, and this injector
supplies operating power for devices drawing a maximum of 30 watts. The PIM1 is a
true plug-and-play product requiring no user configuration or other set-up.
PIM1
Passive Power Over Ethernet (PoE)
Midspan Injector For 10/100TX
1-40º TO
+
75º PASSIVE
LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427