Installation Manual

INS_NWKBB200_REV– 06/10/13 PAGE 5
INSTALLATION AND OPERATION MANUAL NWKBB200
TECH SUPPORT: 1.888.678.9427
1.0 Introduction
The NetWave® NWKBB200 DC-Battery Power Solution provides consistent power for your devices
in locations where power is on a timer or they have frequent blackouts or brownouts.
The NWKBB200 supports AC input ranging from 110 to 277 VAC, and can also support 347 VAC
and 480 VAC with an optional Multi Tap Power Transformer.
The intelligent controller distributes power to the load and batteries when AC power is available
and instantly switches over to DC output only when AC power is lost.
The kit includes valve-regulated lead-acid batteries, outdoor enclosure, mounting hardware and
Smart DC-Battery Power Controller. The aluminum outdoor enclosure has a gasket hinged lid
with one tamper proof lock operated by a special key for high security. The enclosure has built in
mounting brackets that support pole and wall mounting.
This manual contains detailed operational and configuration information.