Installation Manual

INS_NW7[E]/M_REV– 06/10/13 PAGE 17
INSTALLATION AND OPERATION MANUAL NW7[E]/M
TECH SUPPORT: 1.888.678.9427
8.2.1 Reset Button
The reset button is a physical hardware button on the board.
Please refer to Section "Reset Button."
8.2.2 Indicating LEDs
The light emitting diodes (LEDs) on the board are described in Section "LEDs on the Board".
8.2.3 Buzzer
The new NetWave buzzer makes the following sounds:
• Power up: Beep once.
• End of Firmware Loading: Beep twice.
• Alignment: Beep according to signal thresholds defined. The alignment buzzer is described in
Section "Link Status (for Station Mode)".