Installation Manual

INS_NW7[E]/M_REV– 06/10/13 PAGE 15
INSTALLATION AND OPERATION MANUAL NW7[E]/M
TECH SUPPORT: 1.888.678.9427
Detailed Configuration
8.0 Getting Started
To access the NetWave configuration interface, perform the following steps:
1. Connect the local area network (LAN) port of the router to the network port of your computer
using an Ethernet cable. Ethernet cables are also known as LAN cables or network cables.
They connect devices such as computers, routers, and switches on wired networks.
2. Next, take the power adapter that comes with the set and connect it to a power socket as well
as the router. Turn on the power.
3. Assign the Ethernet adapter on your computer with a static IP address on the 192.168.1.x
network, e.g. 192.168.10.10 and with a subnet mask 255.255.255.0.
4. Launch a web browser and enter the default IP address of the router, 192.168.10.101, into the
address bar.
The first page that you see is the login page. The words on the top left denote the hardware part
number and the firmware build version e.g. NW1 NW1_v1.78.0
The login page is presented upon requesting the Netwave Radio’s IP address.
The default authorization details are:
Username: admin
Password: admin