Data Sheet

ManualsBrandsComnet ManualsWireless TransmissionMini Hardened Point-to-Point Wireless Ethernet Kit

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› High throughput:

- Up to 180 Mbps in one direction

- Up to 240 Mbps total full duplex

› Lifetime Warranty

› IEEE802.3af PoE Compliant PD

› 802.11a/n Compliant

› Distances up to 2 mi (FCC) or 2km (ETSI)

› Environmentally Hardened -40º to +70ºC

› Meets class IP67 dust and water immersion protection

standards

› ETSI Standards (EU Region only):

– DFS Dynamic Frequency Selection

– TPC Transmit Power Control

› Secure transmission: WPA2 – AES or TKIP encryption

› ComNet Antenna alignment feature eases installation

and setup

› RF Spectrum Survey Tools

› Antenna Alignment Tools

› LED array displays unit operational status along with received

signal strength

APPLICATIONS

› High Throughput Back Haul Link for installations that require

connecting to more than one Ethernet device

› Simple to deploy and cost-effective alternative to physical

connections to Ethernet edge equipment

› Integration of Ethernet where right-of-way issues mandate

wireless communications

› ITS traffic signalization networks and Video Detection

Systems (VDS)

› Multicast traffic-based video systems

› ITS roadside and city center CCTV surveillance, and

surveillance of high-value or mission-critical assets

› Wireless communications in manufacturing, petrochemical

refineries, wastewater treatment facilities, and other industrial

automation and control applications operating in harsh or

out-of-plant environments

› Electrical substation video and perimeter surveillance

The NetWave® NWK7[E]/M environmentally hardened High Throughput (HT)

wireless Ethernet transmission kit includes a Client and an Access Point. This single

radio model is pre-configured for high throughput point-to-point applications and

comes with an integrated 16dBi, 30º beamwidth antenna. The NW7[E]/M supports

up to 240Mbps throughput using MIMO technology. The units can be powered

by an 802.3af PoE compliant device or through a sold separately PoE injector. The

NWK7/M is FCC certified for use in North America and the NWK7E/M is ETSI, DFS

and TPC certified for use in the European Union. The NWK7[E]/M is an ultra-small

form factor addition to the ComNet NetWave product family.

NWK7[E]/M

Mini Environmentally Hardened

High Throughput Wireless Ethernet Kit

1IP67802.3af-40º TO 70ºC

Summary of content (2 pages)

PAGE 1
Mini Environmentally Hardened High Throughput Wireless Ethernet Kit NWK7[E]/M -40º TO 70ºC 802.3af IP67 1 The NetWave® NWK7[E]/M environmentally hardened High Throughput (HT) wireless Ethernet transmission kit includes a Client and an Access Point. This single radio model is pre-configured for high throughput point-to-point applications and comes with an integrated 16dBi, 30º beamwidth antenna. The NW7[E]/M supports up to 240Mbps throughput using MIMO technology. The units can be powered by an 802.
PAGE 2
Mini Environmentally Hardened High Throughput Wireless Ethernet Device NW7[E]/M SPECIFICATIONS 5GHz Wireless Radio Software Features EIRP NWK7/M (FCC): Up to +36dBm for point to multipoint deployments, +46dBm for point to point deployments with MAC-lock feature enabled NWK7E/M (ETSI): +30dBm RF Output 30dBm Rated Transmitter Operational Frequency 5180MHz – 5825MHz, Region-dependent. Not all frequencies are supported in all regions. Contact ComNet for frequencies supported in your region.