Spec Sheet

31 Jul 2018© 2018 Communication Networks. All Rights Reserved. “ComNet,” the “ComNet Logo,” “NetWave” and the “NetWave Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
NWK11/M Kit
Mini Industrially Hardened Point-To-Point
Wireless Ethernet Kit for Short Range Deployments
SPECIFICATIONS
ORDERING INFORMATION
Part Number Description
NWK11/M Mini Industrially Hardened Narrow Bandwidth Wireless Kit, Supports distances up to 0.5 mi/800 m, FCC certified for North America
NWK11IC/M Mini Industrially Hardened Narrow Bandwidth Wireless Kit, Supports distances up to 0.5 mi/800 m, IC certified for Canada
NWK11E/M Mini Industrially Hardened Narrow Bandwidth Wireless Kit, Supports distances up to 0.5 mi/800 m, ETSI certified for European Union
Included Accessories 2 Pole Mounting Hardware Kits
2 Non Hardened Passive Power Injector s (1 for each radio) for use in benign 0-50º C environments only.
Options PIM1 - Hardened Power Injection Module supporting 24-48V DC and 24VAC Input, Includes 24V 12W power supply
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
NOTE: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
Software Features
Addressing Static IP / DHCP Client / DHCP Server
SNMP V3
Telnet Server Syslog
Dynamic DNS 802.1q VLAN support
Embedded Firewall QoS support
Ability to Assign Static Routes NTP Client
Spanning Tree Protocol support
802.1x Port-Based Network Access Control
User-Configurable Watchdog and Auto-Reboot Mechanism
Multi-Level Configuration and Monitoring Login Accounts
User Configurable Long Range Parameters
Wireless Radio
EIRP NWK11/M (FCC): Up to +36 dBm for point to
multipoint deployments, +46 dBm for point to
point deployments with MAC-lock feature enabled
NWK11IC/M (IC): +30dBm
NWK11E/M (ETSI): +30 dBm
RF Output +30 dBm Rated Transmitter
Operational Frequency 5180 MHz – 5825 MHz, Region-dependent.
Not all frequencies are supported in all regions.
Contact ComNet for frequencies supported in your
region.
Bandwidths 5, 10, 20 and 40 MHz
Standard Internal Antenna
Antenna Internal 16 dBi Dual Polarized Directional
Gain 16 dBi
Azimuth 30º Horizontal/Vertical
Elevation 30º Horizontal/Vertical
Connectors
10/100 Ethernet RJ-45, Sealed Cable Gland
Power
Operating Voltage 24 to 56 VDC
Power Consumption 5 W Max
PD Power Passive PoE
Mechanical
Indicating LEDs Power On Ethernet Link Signal Strength
Size (L × W × H) 7.4 × 7.4 × 2.2 in (18.5 × 18.5 × 5.6 cm)
Shipping Weight: <7.8 lb / 3.5 kg
Environmental
MTBF >100,000 hours
Operating Temp -40° C to +75° C
Storage Temp -40° C to +85° C
Relative Humidity 5% to 95%, non-condensing¹
Warranty
Internal Components Lifetime
Enclosure 3 Year
TYPICAL APPLICATION
A
GENCY COMPLIANCE
IP Camera
P1
NWK11/M
(Client)
NWK11/M
(Access Point)
ComNet Managed
Switch Connected
to Network
P1
PIM*
*Does not support PSE
PIM*
Power
PORT 1 PD
P1
LEGEND
WIRELESS
CAT5
POWER
ETHERNET 50Ω COAX