Spec Sheet

LIFETIME WARRANTY* WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FEATURES
› Complete wireless kit consisting of two radios, power
supplies, and mounting hardware.
› 5, 10, 20 and 40 Mhz Channel Bandwidth Support
› Scalable - Narrow Channel 5 and 10 MHz Bandwidths will
allow you to expand your WLAN without losing reliability by
increasing the total number of non-overlapping channels
› Up to 100 Mbps Throughput
› 802.11a/n Compliant
› Distances up to .5 mi(FCC) or .8km (ETSI and IC)
› Passive PoE on Port 1
› Environmentally Hardened -40º to +75ºC
› Meets class IP67 dust and water immersion protection
standards
› Secure transmission: WPA2 – AES or TKIP encryption
› ComNet Antenna alignment feature eases installation
and setup
› RF Spectrum Survey Tools
› LED array displays unit operational status along with
received signal strength
› Firmware Upgrades Included Free for the life of the product
› Installation and Configuration Trainings Available
› Radio Internal Components covered by Lifetime Warranty.
› Enclosure covered by Three Year Warranty.
APPLICATIONS
› Short-Range Video Surveillance
› Multipurpose Networks
› ITS Applications
The NetWave® NWK11/M mini industrially hardened wireless kit is a low cost
option for short range deployments that requires full featured radio performance.
The wide range of channel spectrum widths available on the NWK11/M package
of radios gives you the option of narrowing channel bandwidths as your network
grows which will increase the number of non-overlapping channels and improve
stability. The NWK11/M series radio kit comes standard with integrated antennas
and IP67 rated impact resistant ABS enclosures designed to survive the most
extreme conditions.
The NWK11/M is FCC certified for use in North America, NWK11IC/M is IC Certified
for use in Canada, and the NWK11E/M is ETSI, DFS and TPC certified for use in the
European Union.
NWK11/M Kit
Mini Industrially Hardened Point-To-Point
Wireless Ethernet Kit for Short Range Deployments
1IP67-40º TO 75ºC PASSIVE POE