Spec Sheet

ManualsBrandsComnet ManualsWireless TransmissionIndustrially Hardened Narrow Bandwidth Wireless Radio, Supports distances up to 2 mi/3.2 km

LIFETIME WARRANTY* WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

FEATURES

› Narrow Channel Spectrum Widths for large and noisy

deployments

› 5, 10, 20 and 40 Mhz Channel Bandwidth Support

› Up to 240 Mbps Throughput

› 802.11a/n Compliant

› Distances up to 2 mi (FCC, IC) or 2km (ETSI)

› IEEE802.3at PoE Compliant PD on port 1

› IEEE802.3af power source (PSE) available on port 2

› Environmentally Hardened -40º to +75ºC

› Meets class IP67 dust and water immersion protection

standards

› Secure transmission: WPA2 – AES or TKIP encryption

› ComNet Antenna alignment feature eases installation

and setup

› RF Spectrum Survey Tools

› Antenna Alignment Tools

› LED array displays unit operational status along with

received signal strength

› Scalable - Narrow Channel 5 and 10 MHz Bandwidths will

allow you to expand your WLAN without losing reliability by

increasing the total number of non-overlapping channels

› Firmware Upgrades Included Free for the life of the product

› Installation and Configuration Trainings Available

› Radio Internal Components covered by Lifetime Warranty.

› Enclosure covered by Three Year Warranty.

APPLICATIONS

› High-Bandwidth Video Surveillance

› Multipurpose Networks

› ITS Applications

The NetWave® NW(1,2)[IC] Industrial Grade high performance wireless radio is

ideal for high capacity and scalable deployments where channel overlapping and

interference typically cause our discounted competitors radios to become unstable.

The wide range of channel spectrum widths available on the NW(1,2)[IC] series of

radios gives you the option of narrowing channel bandwidths as your network grows

which will increase the number of non-overlapping channels and improve stability.

The NW(1,2)[IC] comes standard with an integrated antenna and an IP67 rated

impact resistant polycarbonate enclosure that is designed to survive the most extreme

conditions.

The NW1 is FCC certified for use in the United States. The NW2 is ETSI, DFS and TPC

certified for use in the European Union. The NW1IC is certified for use in Canada.

NW(1,2)[IC]

Industrially Hardened High Performance

Wireless for High Density Environments

1 1IP67-40º TO 75ºC IEEE802.3atIEEE802.3at

Summary of content (2 pages)

PAGE 1
Industrially Hardened High Performance Wireless for High Density Environments NW(1,2)[IC] -40º TO 75ºC IEEE802.3at IEEE802.3at IP67 1 1 The NetWave® NW(1,2)[IC] Industrial Grade high performance wireless radio is ideal for high capacity and scalable deployments where channel overlapping and interference typically cause our discounted competitors radios to become unstable.
PAGE 2
Industrially Hardened High Performance Wireless for High Density Environments NW(1,2)[IC] SPECIFICATIONS Software Features Connectors Addressing Static IP / DHCP Client / DHCP Server SNMP V3 Telnet Server Syslog Dynamic DNS 802.1q VLAN support Embedded Firewall QoS support Ability to Assign Static Routes NTP Client Spanning Tree Protocol support 802.