Data Sheet

24 Apr 2017© 2017 Communication Networks. All Rights Reserved. “ComNet,” the “ComNet Logo,” “NetWave” and the “NetWave Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
NW10[E]
Industrially Hardened High Performance
Wireless for High Density Environments
SPECIFICATIONS
ORDERING INFORMATION
Part Number Description
NW10 Industrially Hardened Narrow Bandwidth Wireless Radio, Supports distances up to 2 mi/3.2 km, FCC certified for North America
NW10E Industrially Hardened Narrow Bandwidth Wireless Radio, Supports distances up to 2 km/1.25 mi, ETSI certified for European Union
Included Accessories Pole Mounting Hardware Kit
Options NWBKT - Articulating Wall or Pole Mounting Kit. Supports up to 3in/76mm diameter poles. (Sold Separately)
PIM1 - Hardened Power Injection Module supporting 24-48V DC and 24VAC Input, Includes 24V 12W power supply
CNGE1IPS - Hardened 35 W Midspan Power Injection Module for Passthrough PoE Applications supporting 90-264V AC and 56V DC Input
Add suffix /BB for Internal Battery Backup supporting up to 15 minutes of operation depending unit configuration
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
NOTE: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
Software Features
Addressing Static IP / DHCP Client / DHCP Server
SNMP V3
Telnet Server Syslog
Dynamic DNS 802.1q VLAN support
Embedded Firewall QoS support
Ability to Assign Static Routes NTP Client
Spanning Tree Protocol support
802.1x Port-Based Network Access Control
User-Configurable Watchdog and Auto-Reboot Mechanism
Multi-Level Configuration and Monitoring Login Accounts
User Configurable Long Range Parameters
Wireless Radio
EIRP NW10 (FCC): Up to +36 dBm for point to
multipoint deployments, +49 dBm for point to
point deployments with MAC-lock feature enabled
NW10E (ETSI): +30 dBm
RF Output +30 dBm Rated Transmitter
Operational Frequency 5180 MHz – 5825 MHz, Region-dependent.
Not all frequencies are supported in all regions.
Contact ComNet for frequencies supported in your
region.
Bandwidths 5, 10, 20 and 40 MHz
Standard Internal Antenna
Antenna Internal 19 dBi Dual Polarized Directional
Gain 19 dBi
Azimuth 17º Horizontal/Vertical
Elevation 17º Horizontal/Vertical
Connectors
Gigabit Ethernet Port 1 RJ-45, Sealed Cable Gland
10/100 Ethernet Port 2 RJ-45, Sealed Cable Gland
Power
Operating Voltage 42 to 57 VDC
Power Consumption 5 W Max
PD Power IEEE802.3af/at pass-through PD compliant
PSE Power IEEE802.3af PSE compliant uplink
Mechanical
Indicating LEDs Power On Ethernet Link Signal Strength
Size (L × W × H) 10.6 × 10.6 × 2.9 in (27 × 27 × 7.5 cm)
Shipping Weight: < 4.4 lb / 2 kg
Environmental
MTBF >100,000 hours
Operating Temp -40° C to +75° C
Storage Temp -40° C to +85° C
Relative Humidity 5% to 95%, non-condensing¹
Warranty
Internal Components Lifetime
Enclosure 3 Year
NW10
(Client)
NW10
(Access Point)
ComNet Managed
Switch with 30W PoE
Connected to Network
CNGE1IPS or
any PSE device
PoE Camera
Power
P1
P2
1Gbps
Port 1: 10/100/1000TX RJ-45
IEEE802.3af/at PD compliant
Port 2: 10/100TX RJ-45
IEEE802.3af PSE compliant
P1
P2
Legend
Wireless
Cat5
Power
Ethernet
TYPICAL APPLICATION
A
GENCY COMPLIANCE