Data Sheet

24 Apr 2017© 2017 Communication Networks. All Rights Reserved. “ComNet,” the “ComNet Logo,” “NetWave” and the “NetWave Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
NW10DR
Industrially Hardened High Throughput and Scalable Dual Radio
Wireless Bridge with Optional External Antenna
SPECIFICATIONS
ORDERING INFORMATION
Part Number Description
NW10DR Industrially Hardened Dual Radio Narrow Bandwidth Wireless Bridge, Supports distances up to 2 mi/3.2 km, FCC certified for North America
Included Accessories Pole Mounting Hardware Kit
Compatible External
Antennas
NWAVBSA1 - Dual Polarization Variable Beamwidth Sector Antenna for NetWave Wireless Ethernet Devices (Sold Separately)
NWADA1 - Dual Polarization 4.9-5.8GHz 19dBi 17 degree Beamwidth Antenna for NetWave Wireless Ethernet Devices (Sold Separately)
NWAODA1 - External Omni Directional Dual Band Antenna for NetWave Wireless Ethernet Devices (Sold Separately)
Options NWBKT - Articulating Wall or Pole Mounting Kit. Supports up to 3in/76mm diameter poles. (Sold Separately)
PIM1 - Hardened Power Injection Module supporting 24-48V DC and 24VAC Input, Includes 24V 12W power supply
Add suffix /BB for Internal Battery Backup supporting up to 15 minutes of operation depending unit configuration
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
NOTE: In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
Software Features
Addressing Static IP / DHCP Client / DHCP Server
SNMP V3
Telnet Server Syslog
Dynamic DNS 802.1q VLAN support
Embedded Firewall QoS support
Ability to Assign Static Routes NTP Client
Spanning Tree Protocol support
802.1x Port-Based Network Access Control
User-Configurable Watchdog and Auto-Reboot Mechanism
Multi-Level Configuration and Monitoring Login Accounts
User Configurable Long Range Parameters
Wireless Radio
EIRP NW10DR (FCC): Up to +36 dBm for point to
multipoint deployments, +49 dBm for point to
point deployments with MAC-lock feature enabled
NW10DRE (ETSI): ETSI Unit Not Available
RF Output +30 dBm Rated Transmitter
Operational Frequency 5180 MHz – 5825 MHz, Region-dependent.
Not all frequencies are supported in all regions.
Contact ComNet for frequencies supported in your
region.
Bandwidths 5, 10, 20 and 40 MHz
Standard Internal Antenna
Antenna Internal 19 dBi Dual Polarized Directional
Gain 19 dBi
Azimuth 17º Horizontal/Vertical
Elevation 17º Horizontal/Vertical
Connectors
10/100 Ethernet Port 2 RJ-45, Sealed Cable Gland
Gigabit Ethernet Port 1 RJ-45, Sealed Cable Gland
External Antenna (Radio 2) 2 × N-Type 50 ohm
Power
Operating Voltage 42 to 57 VDC
Power Consumption 5 W Max
PD Power IEEE802.3af/at PD compliant
PSE Power IEEE802.3af PSE compliant
Mechanical
Indicating LEDs Power On Ethernet Link Signal Strength
Size (L × W × H) 10.6 × 10.6 × 2.9 in (27 × 27 × 7.5 cm)
Shipping Weight: < 4.4 lb / 2 kg
Environmental
MTBF >100,000 hours
Operating Temp -40° C to +75° C
Storage Temp -40° C to +85° C
Relative Humidity 5% to 95%, non-condensing¹
Warranty
Internal Components Lifetime
Enclosure 3 Year
NWADA1
Antenna (Client)
NWADA1
Antenna (Client)
NW10DR
Internal Antenna
Access Point
NW10DR
Internal Antenna
Access Point
NW10
(Access Point)
NW10
(Access Point)
ComNet Managed Switch with
30W PoE Connected to Network
ComNet Managed Switch with
30W PoE Connected to Network
CNGE1IPS or
any PSE device
CNGE1IPS or
any PSE device
TYPICAL APPLICATION
PoE Camera
PoE Camera
PoE Camera
A
GENCY COMPLIANCE