Data Sheet
LIFETIME WARRANTY* WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FEATURES
› Narrow Channel Spectrum Widths for large and noisy
deployments
› 5,10,20 and 40 Mhz Channel Bandwidth Support
› Up to 240 Mbps Throughput
› 802.11a/n Compliant
› Distances up to 2 miles
› IEEE802.3at PoE Compliant PD on port 1
› IEEE802.3af power source (PSE) available on port 2
› Environmentally Hardened -40º to +75ºC
› Meets class IP67 dust and water immersion protection
standards
› Secure transmission: WPA2 – AES or TKIP encryption
› ComNet Antenna alignment feature eases installation and
setup
› RF Spectrum Survey Tools
› Antenna Alignment Tools
› Radio Internal Components covered by Lifetime Warranty.
› Enclosure covered by Three Year Warranty.
APPLICATIONS
› Installations that require redundant ring or linear drop and
repeat topologies
› Large deployments where there is significant channel
overlapping causing interference
› Point to Multi-Point topologies whereby several Clients
connect to one Access Point
› Simple to deploy and cost-effective alternative to physical
connections to Ethernet edge equipment
› Integration of Ethernet where right-of-way issues mandate
wireless communications
› ITS traffic signalization networks and Video Detection
Systems (VDS)
› ITS roadside and city center CCTV surveillance, and
surveillance of high-value or mission-critical assets
› Wireless communications in manufacturing, petrochemical
refineries, wastewater treatment facilities, and other
industrial automation and control applications operating in
harsh or out-of-plant environments
› Electrical substation video and perimeter surveillance
The NetWave® industrially hardened narrow bandwidth dual wireless radio is is used
for redundant ring and drop & repeat topologies when used with an external antenna.
Radio 1 is a 19dBi 17° internal antenna while radio 2 has dual N-Female connectors
for an external 5GHz antenna. The wide range of channel spectrum widths available
on the NW10DR series of radios gives you the option of using wide channel widths for
high throughput deployments that have little interference and noise while the narrow
channel widths will increase the number of available non overlapping channels and
improve stability in crowded RF environments but decrease maximum throughput. The
NW10DR is FCC certified for use in North America.
Shown with NWADA1 antenna
(sold separately)
NW10DR
Industrially Hardened High Throughput and Scalable Dual Radio
Wireless Bridge with Optional External Antenna
1 1IP67-40º TO 75ºC 802.3af/at802.3at