Data Sheet

SPECIFICATIONS
Video
Video Input 1 volt pk-pk (75 ohms)
Overload >1.5 V pk-pk
Bandwidth 5 Hz - 6.5 MHz
Differential Gain <2%
Dif feren tial Phase <0.7º
Tilt <1%
Signal-to-Noise Ratio (SNR) 67 dB @ Maximum Optical Loss Budget
Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to
maintain 6 Mhz Bandwidth
Data
Data Interface RS232, RS422 and RS485 (2W/4W)
Data Format NRZ, NRZI, Manchester, Bi-Phase and Sensornet
Data Rate DC-250 Kbps (NRZ)
Contact Interface
Response Time 0.5 msec
Input Dry Contact Closure
Output SPST Relay, 0.5 A Contact Rating – normally open
Connectors
Optical SFP modules
Power Terminal Block
Video BNC
Data Terminal Block
Contact Closure Terminal Block
Wavelength SFP dependent
Number of Fibers¹ SFP dependent
Optical Emitter SFP dependent
Indicating LEDs Fiber Status Video Sync Presence
Received Data Transmitted Data Power
Power
Surface Mount 8 to 15 VDC
Power Consumption 5 W
Rack Mount From Rack
Electrical & Mechanical
Number of Rack Slots 3
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 2.2 in (15.5 × 13.5 × 5.6 cm)
Shipping Weight <2 lb / 0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)²
[1] Multimode fiber needs to meet or exceed fiber standard ITU-T G.651.
Single mode fiber needs to meet or exceed fiber standard ITU-T G.652
FVT/FVR80D2SFP
(8) 10-Bit Digital Video Channels + 2 Bi-Directional Data Channels
+ 1 Bi-Directional Contact Closure with SFP Optical Devices
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description
FVT80D2SFP 8 Channel Video, 2 Channel Data / 1 Channel Contact
FVR80D2SFP 8 Channel Video, 2 Channel Data / 1 Channel Contact
Included Accessories DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Options [2] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
User-selection of SFP modules (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
OPTICAL FIBER
COPPER CABLE
Optic Fiber Count and Type dependent on
user selection of SFP modules.
V V
D
C
D
C
FVT80D2SFP
FVR80D2SFP
2
8
2
8
09 Jan 2015© 2015 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
INFO@COMNET.NET
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: +44 (0)113 307 6400
|
F: +44 (0)113 253 7462
|
INFO-EUROPE@COMNET.NET