Data Sheet

FEATURES

› AM Video Transmission

› NTSC, PAL, SECAM compatible

› Full color compatibility

› Plug-and-Play design for ease of installation

› No electrical or optical adjustments required

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical

shock, vibration, humidity with condensation, high-line/low-

line voltage conditions and transient voltage protection) of

NEMA TS-1/TS-2 and the Caltrans Specification for Traffic

Signal Control Equipment.

› Voltage transient protection on all power and signal input/

output lines provides protection from power surges and other

voltage transient events.

› Bi-color (Red/Green) LED indicators are provided for rapidly

ascertaining equipment operating status

› May be DIN-rail mounted by the addition of ComNet model

DINBKT1 or DINBKT4 adaptor plate.

› Lifetime Warranty

APPLICATIONS

› CCTV (Fixed Video)

The ComNet™ FVT11M video mini-transmitter supports transmission of a fixed

video signal using AM modulation on one multimode fiber optic cable. The

FVT11M video transmitter is compatible with the FVR11M, FVR10M, FVR21, and

FVR22 receivers. Plug-and-play design ensures ease of installation requiring no

electrical or optical adjustments. The transmitter incorporates a bi-color (Red/

Green) indicating LED for monitoring proper system operation.

FVT11M

Single Mini Video Transmitter

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

HARDENEDINCLUDED

PAGE 1
Single Mini Video Transmitter FVT11M INCLUDED HARDENED 1 The ComNet™ FVT11M video mini-transmitter supports transmission of a fixed video signal using AM modulation on one multimode fiber optic cable. The FVT11M video transmitter is compatible with the FVR11M, FVR10M, FVR21, and FVR22 receivers. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. The transmitter incorporates a bi-color (Red/ Green) indicating LED for monitoring proper system operation.
PAGE 2
Single Mini Video Transmitter FVT11M SPECIFICATIONS Video Power Video Input 1 volt pk-pk (75 ohms) Bandwidth 5 Hz to 10 MHz Differential Gain <5% Differential Phase <5˚ Tilt <1% Signal-to-Noise Ratio (SNR) 60 dB Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to maintain 6 Mhz Bandwidth Wavelength 850 nm, Multimode Number of Fibers 1 Indicating LEDs 8 to 15 VDC 2W Electrical & Mechanical Circuit Board Meets IPC Standard Size 2.3 × 1.6 × 1.1 in (5.7 × 4.