Operation Manual

INS_FVT/FVR110_REV–
10/27/11
PAGE 7
TECH SUPPORT: 1.888.678.9427
INSTALLATION AND OPERATION MANUAL FVT/FVR110(M,S)1[/M]
FIGURE 10 – LED INDICATORS on Transmitter (FVT) and Receiver (FVR)
Device
Indicator
LED Status POWER LED LINK LED VIDEO LED DATA LED CIN LED COUT LED
FVT
OFF device is not
powered or is not
powered properly
N/A N/A active data
signal not
present on the
pins of the data
connector
no closure
detected across
CIN pair
relay contacts open
IBCC mode - no closure detected across CIN
pair at FVR
VSS mode - closure detected across CIN
pair at FVR
OLS mode - optical link not detected
NOLS mode - optical link detected
SOLID RED N/A optical link
not detected
video signal not
present on the
BNC connector
N/A N/A N/A
SOLID GREEN device is powered
properly
optical link
detected
video signal
present on the
BNC connector
active data
signal present
on the pins
of the data
connector
closure detected
across CIN pair
relay contacts closed
IBCC mode - closure detected across CIN
pair at FVR
VSS mode - no closure detected across CIN
pair at FVR
OLS mode - optical link detected
NOLS mode - optical link not detected
FVR
OFF device is not
powered or is not
powered properly
N/A N/A active data
signal not
present on the
pins of the data
connector
no closure
detected across
CIN pair
relay contacts open
IBCC mode - no closure detected across CIN
pair at FVT
VSS mode - video signal not detected at
BNC input at FVT
OLS mode - optical link not detected
NOLS mode - optical link detected
SOLID RED N/A optical link
not detected
video signal not
present on the
BNC connector
N/A N/A N/A
SOLID GREEN device is powered
properly
optical link
detected
video signal
present on the
BNC connector
active data
signal present
on the pins of
the data con-
nector
closure detected
across CIN pair
relay contacts closed
IBCC mode - closure detected across CIN
pair at FVT
VSS mode - video signal detected at BNC
input at FVT
OLS mode - optical link detected
NOLS mode - optical link not detected