Data Sheet

30 Dec 2014
© 2015 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]
SPECIFICATIONS
Video
Video Input 1 volt pk-pk (75 ohms)
Overload >1.5 V pk-pk
Bandwidth 5 Hz - 10 MHz
Differential Gain <2%
Dif f erential Phase <0.7˚
Tilt <1%
Signal-to-Noise Ratio (SNR) 67 dB @ Maximum Optical Loss Budget
Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to
maintain 6 Mhz Bandwidth
Data
Data Format RS-232, RS-422, 2 or 4-wire RS-485 w/Tri-State,
Manchester, bi-phase and up-the-coax data
Data Rate DC-115 Kbps (NRZ)
Wavelength 1310/1550 nm, MM and SM
Number of Fibers 1
Optical Emitter Laser Diode
LED Indicators › Video Sync Presence › Received Data
› Transmitted Data › Optical Carrier Detect
Connectors
Optical ST (Standard)
SC of FC (Optional)
Power Terminal Block
Video BNC (Gold Plated Center-Pin)
Data Terminal Block
Power
Operating Voltage Range 8 to 15 VDC (or from C1 Rack, sold separately)
Power Consumption 2 W
Electrical & Mechanical
Number of Rack Slots 1
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight <2 lb / 0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹
FVT/FVR1031(M,S)1
10-Bit Digital Video with Bi-Directional Data (RS232, RS422
and RS485 2 & 4 Wire) Pelco and Panasonic “Up-The-Coax”
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description Fiber
Optical PWR
Budget Max. Distance²
Max. UTC
Distance²
FVT1031M1 Video Transmitter/Data Transceiver Multimode 62.5/125µm 16 dB 3 km (2 mi) 1 km (0.6 mi)
FVR1031M1 Video Receiver/Data Transceiver Multimode 62.5/125µm 16 dB 3 km (2 mi) 1 km (0.6 mi)
FVT1031S1 Video Transmitter/Data Transceiver Single Mode 9/125µm 23 dB 69 km (43 mi) 1 km (0.6 mi)
FVR1031S1 Video Receiver/Data Transceiver Single Mode 9/125µm 23 dB 69 km (43 mi) 1 km (0.6 mi)
Accessories DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Options [1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (extra charge, consult factory)
Add ‘/SC’ for SC Connectors
Add ‘/FC’ for FC Connectors
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
[2] Distance may be limited by optical dispersion. Check with control system manufacturer for distance limits on up-the-coax systems.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
OPTICAL FIBER
VIDEO (Coax)
1 Fiber
V V
D D
FVT1031S1
FVR1031S1