Data Sheet

SPECIFICATIONS
Video
Video Input 1 volt pk-pk (75 ohms)
Overload >1.5 V pk-pk
# Input/Output Channels 4
Bandwidth (minimum) 10 Hz - 6.5 MHz per channel
Differential Gain <2%
Dif feren tial Phase <0.7˚
Tilt <1%
Signal-to-Noise Ratio (SNR) 67 dB Typical
Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to
maintain 6 Mhz Bandwidth
Audio
# Input/Output Channels 4 (balanced)
Audio Input/Output Signal 4.4 volt pk-pk (+6dBm)
Bandwidth 20Hz - 18kHz
Total Harmonic Distortion <0.02%
Signal-to-Noise Ratio (SNR) 85 dB (minimum)
Wavelength 1310 nm/1550 nm, Multimode & Single Mode
Number of Fibers 1
LED Indicators › Video CH 1-4 › Audio CH 1-4 › Link › Power
Optical Emitter Laser Diode
Connectors
Optical ST
Power Terminal Block
Video BNC (Gold Plated Center-Pin)
Audio Terminal Block
Power
Operating Voltage Range 8 to 15 VDC
Power Consumption 4 W
Rack Mount Supplied From Rack
Electrical & Mechanical
Number of Rack Slots 2
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size (in./cm) (L×W×H) 6.1 × 5.3 × 2.2 in (15.5 × 13.5 × 5.6 cm)
Shipping Weight <2 lb./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹
FVT/FVR40A4(M,S)1
4-Channel 10-Bit Digitally Encoded Video
+ 4-Channel 24-Bit Digitally Encoded Audio Multiplexer
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description
Fibers
Required Fiber
Optical PWR
Budget
Maximum
Distance²
# Rack
Slots
FVT40A4M 4 Channel Video/Audio Transmitter (1310/1550 nm)
1
Multimode
62.5/125µm
16 dB 2 km (1.2 mi) 2
FVR40A4M 4 Channel Video/Audio Receiver (1310/1550 nm)
FVT40A4S 4 Channel Video/Audio Transmitter (1310/1550 nm)
1
Single Mode
9/125µm
16 dB 48 km (30 miles) 2
FVR40A4S 4 Channel Video/Audio Receiver (1310/1550 nm)
Accessories 9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Options [1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is
recommended.
[2] Distance may be limited by optical dispersion.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J In a continuing effort to
improve and advance technology, product specifications are subject to change without notice.
OPTICAL FIBER
COPPER CABLE
1 Fiber
A
V
A
V
FVT40A4S1
FVR40A4S1
4
4
4
4
09 Jan 2015© 2015 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]