Data Sheet

SPECIFICATIONS
Video
Video Input 1 volt pk-pk (75 ohms)
Bandwidth 5 Hz - 10 MHz
Differential Gain <5%
Dif fer ential P hase <5˚
Tilt <1%
Signal-to-Noise Ratio (SNR) >55 dB @ 10 dB ATTN.
Max. RG-59 COAX Distance 100 m (300 ft) Camera to Fiber Optic Module to
maintain 6 Mhz Bandwidth
Data
Data Format RS232, RS422, Manchester, biphase
Data Rate DC-115 Kbps (NRZ)
Wavelength 850 nm
Number of Fibers 2
Indicating LEDs › Video Sync Presence for Each Video Channel
› Transmit Data › Receive Data
Connectors
Optical ST
Power Terminal Block
Data Terminal Block
Video BNC (Gold Plated Center-Pin)
Power
Surface Mount 8 to 15 VDC
Power Consumption 4 W
Rack Mount Supplied From Rack
Electrical & Mechanical
Number of Rack Slots 1
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight <2 lb / 0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹
FVT/FVR15M2 SERIES
Video with Return Data
TYPICAL APPLICATION
ORDERING INFORMATION
OPTICAL FIBER
VIDEO (Coax)
2 Fibers
V
D
V
D
FVT15M2
FVR15M2
Part Number Description
Fibers
Required Fiber
Optical PWR
Budget Max Distance²
# Rack
Slots
FVT15M2 Video Transmitter/Data Receiver
2 Multimode 62.5/125µm 10 dB 2.5 km (1.5 mi) 1
FVR15M2 Video Receiver/Data Transceiver
Accessories DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Options
[1] Add suffix ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
[2] Distance may be limited by optical dispersion.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice
10 Feb 2015© 2015 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]