Data Sheet

specifications
11.07.11© 2011 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [e-mail]
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: [phone] | F: [phone] | [e-mail]
10-bit digital video with one bi-directional data
channel + one 10/100 Mbps fast Ethernet port
VIDEO
Video Input: 1 volt pk-pk (75 ohms)
Overload: >1.5V pk-pk
Bandwidth: 5 Hz - 10 MHz
Differential Gain: <2%
Differential Phase: <0.7˚
Tilt: <1%
Signal-to-Noise Ratio (SNR): 67 dB @ Maximum Optical Loss Budget
Max. RG-59 COAX Distance: 100m (300ft) Camera to Fiber Optic Module to
maintain 6Mhz Bandwidth
DATA
Data Interface: RS232, RS422 and RS485 (2W/4W), UTC (Up-the-
Coax)
Data Format: NRZ, NRZI Manchester, Bi-phase and Sensornet
Data Rate: DC-250 Kbps (NRZ)
ETHERNET
Data Interface: 10/100 BASE-T/TX
Data Rate: 10/100 Mbps
Full Duplex
WAVELENGTH 1310/1550 nm, MM and SM
NUMBER OF FIBERS 1
OPTICAL EMITTER Laser Diode
LED INDICATORS - Link - Video - Data - Ethernet Activity
CONNECTORS
Optical: 1 ST connector
Power: Terminal Block
Video: BNC (Gold Plated Center-Pin)
Data: RJ45
Small-Size Data: Terminal Block
Ethernet: RJ45
ELECTRICAL & MECHANICAL
Power:
Surface Mount: 8-15 VDC @ 350 mA
Current Protection: Automatic Resettable
Solid-State Current Limiters
Circuit Board: Meets IPC Standard
Size (in./cm) (L×W×H) - Mini 4.1 × 3.7 × 1.1 in.,
(10.4 × 9.4 × 2.8 cm)
Size (in./cm) (L×W×H) - Full Size 6.1 × 5.3 × 1.1 in.,
(15.5 × 13.5 × 2.8 cm)
Shipping Weight: <2 lb./0.9 kg
ENVIRONMENTAL
MTBF: >100,000 hours
Operating Temp: -40˚ C to +75˚ C
Storage Temp: -40˚ C to +85˚ C
Relative Humidity: 0% to 95% (non-condensing)*
* May be extended to condensation conditions by adding suffix ‘/C’
to model number for conformal coating.
Mini-Video Transmitter/Data Transceiver
Video Transmitter/Data Transceiver
Video Receiver/Data Transceiver
PART
NUMBER
OPTICAL
PWR BUDGET
MAX.
DISTANCE
†
FVT10D1EMM
FVT10D1EM
FVR10D1EM
Multimode
62.5/125µm
FIBERS
REQUIRED
DESCRIPTION
FIBER
1 3 km (2 miles)16 dB
Mini-Video Transmitter/Data Transceiver
Video Transmitter/Data Transceiver
Video Receiver/Data Transceiver
FVT10D1ESM
FVT10D1ES
FVR10D1ES
Single Mode
9/125µm
1 48 km (30 miles)16 dB
NOTE: This product requires a fiber installation with a minimum 35 dB connector return loss. The use of Super Polish Connectors is recommended. Complies with FDA Performance Standard for Laser
Products, Title 21, Code of Federal Regulations, Subchapter J. In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
† Distance may be limited by optical dispersion. Check with control system manufacturer for distance limits on up-the-coax systems.
OPTICAL FIBER
COPPER
1 Fiber
9/125µm SM
Up to 48 km
(30 miles)
D
V
D
V
E E
FVT10D1ESM
FVR10D1ES
FVT10D1E(M)(S)M
FVT/FVR10D1E(M)(S)
Accessories
Options
9 Volt DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
Add ‘/C’ for Conformally Coated Circuit Boards (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1)