Data Sheet

SPECIFICATIONS
Data
Data Format RS232, RS422, 2 or 4-wire RS485
w/Tri-State, Manchester, bi-phase, Sensornet
Data Rate DC-250 kbps
Operating Mode Asynchronous, simplex or full-duplex
Bit Error Rate <10-9 @ Maximum Optical Loss Budget
Wavelength 1310/1550 nm
Fibers 1 In/1 Out
Optical Emitter Laser
LED Indicators › Power › Data In › Data Out › Link
› Loop Back
Connectors
Power Terminal Block
Optical ST
Data Terminal Block
Relay Terminal Block
Power
Operating Voltage Range 8 to 15 VDC (or from C1 Rack, sold separately)
Power Consumption 2 W
Electrical & Mechanical
Number of Rack Slots 1 (ComFit)
Current Protection Automatic Resettable Solid-State Current Limiters
Circuit Board Meets IPC Standard
Size, Mini 4.1 × 3.7 × 1.1 in (10.4 × 9.4 × 2.8 cm)
Size, ComFit 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
Shipping Weight <2 lbs./0.9 kg
Environmental
MTBF >100,000 hours
Operating Temp -40˚ C to +75˚ C
Storage Temp -40˚ C to +85˚ C
Relative Humidity 0% to 95% (non-condensing)¹
FDX60(M,S)[-M]
RS232/RS422/RS485 Data Transceiver
TYPICAL APPLICATION
ORDERING INFORMATION
Part Number Description
Fibers
Req’d Fiber
Optical Pwr
Budget
Maximum
Distance # Rack Slots
FDX60M1(A)Z(B)-M RS232, RS422, RS485(2W & 4W), Mini 1 Multimode 62.5/125µm 16 dB 4 km (2.5 miles) NA
FDX60M1(A)(B) RS232, RS422, RS485(2W & 4W) 1 Multimode 62.5/125µm 16 dB 4 km (2.5 miles) 1
FDX60S1(A)(B)-M RS232, RS422, RS485(2W & 4W), Mini 1 Single Mode 9/125µm 23 dB 69 km (43 miles) NA
FDX60S1(A)(B) RS232, RS422, RS485(2W & 4W) 1 Single Mode 9/125µm 23 dB 69 km (43 miles) 1
FDX60M2-M RS232, RS422, RS485(2W & 4W), Mini 2 Multimode 62.5/125µm 16 dB 4 km (2.5 miles) NA
FDX60M2 RS232, RS422, RS485(2W & 4W) 2 Multimode 62.5/125µm 16 dB 4 km (2.5 miles) 1
FDX60S2-M RS232, RS422, RS485(2W & 4W), Mini 2 Single Mode 9/125µm 23 dB 69 km (43 miles) NA
FDX60S2 RS232, RS422, RS485(2W & 4W) 2 Single Mode 9/125µm 23 dB 69 km (43 miles) 1
Accessories
Options
DC Plug-in Power Supply, 90-264 VAC, 50/60 Hz (Included)
[1] Add ‘/C’ for Conformally Coated Circuit Boards to extend to condensation conditions (Extra charge, consult factory)
DIN-Rail Mounting Adaptor Plate Kit – With mounting hardware (Optional, order model DINBKT1 or DINBKT4)
NOTE: This product requires a fiber installation with a minimum 30 dB connector return loss. The use of Super Polish Connectors is recommended.
Complies with FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J
In a continuing effort to improve and advance technology, product specifications are subject to change without notice.
D D
FDX60S1A
FDX60S1B
OPTICAL FIBER
RS232 or RS422
NOTE: Unit can be used for transmission of
RS232 or RS422, but not simultaneously.
22 Dec 2014© 2014 Communication Networks. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks.
3 CORPORATE DRIVE
|
DANBURY, CONNECTICUT 06810
|
USA
|
T: 203.796.5300
|
F: 203.796.5303
|
TECH SUPPORT: 1.888.678.9427
|
[e-mail]
8 TURNBERRY PARK ROAD
|
GILDERSOME
|
MORLEY
|
LEEDS, UK LS27 7LE
|
T: [phone]
|
F: [phone]
|
[e-mail]