Installation Manual

INS_FDC10_REV–
09/25/15
PAGE 3
FIGURE 2 – Physical Features of FDC10 Small Size Unit
INSTALLATION AND OPERATION MANUAL FDC10 SERIES
TECH SUPPORT: 1.888.678.9427
Table 2 – Physical Feature Descriptions
Call-out Description Manual Reference
1
Optical Fiber Connection
2
Relay Contact Indicating LED See Table 4 - Indicating LEDs
3
Carrier Detect Indicating LED See Table 4 - Indicating LEDs
4
Normally Open (NO) Relay Output Pair
5
Normally Open (NO) Optical Link Alarm Relay
6
Dry Contact Closure Input Pair
7
Power Connections See Table 3 – Power Connections per Use Case
1
2
3
6
5
4
7
Table 3 – Power Connections per Use Case
FDC10R FDC10
Surface Mount 12 to 24 VDC 8 to 15 VDC
C1 Rack 9 VDC (Supplied by Rack, Remove Electrical Connector) NA
Table 4 – Indicating LEDs
CONTACT OUT / RELAY CONTACT ALARM / CARRIER DETECT
SOLID GREEN Closure detected on opposite end input pair
Optical Link is Good
Power Applied
Good Optical Link (Relay Closed)
SOLID RED No Closure detected on opposite end input pair OR Optical Link Failure Red Both Ends, Optical Link Failure (Relay Open)
OFF Power Not Applied Power Not Applied