User Manual

64
SNMP System Configuration interface
6.19.2 Trap Configuration
A trap manager is a management station that receives the trap messages generated by
the switch. If no trap manager is defined, no traps will be issued. Create a trap manager
by entering the IP Address of the station and a community string. To define a
management station as a trap manager, assign an IP address, enter the SNMP
community strings, and select the SNMP trap version.
 IP Address: Enter the IP address of the trap manager.
 Community: Enter the community string.
 Trap Version: Select the SNMP trap version type—v1 or v2c.
 Select button.
 To remove the community string, select the community string listed in the current
managers field and select button.