Data Sheet

specifications
03.24.11© 2011 Communications Networks Corporation. All Rights Reserved. “ComNet” and the “ComNet Logo” are registered trademarks of Communication Networks, LLC.
3 CORPORATE DRIVE | DANBURY, CT 06810 | USA
T: 203.796.5300 | F: 203.796.5303 | TECH SUPPORT: 1.888.678.9427 | [e-mail]
8 TURNBERRY PARK ROAD | GILDERSOME | MORLEY | LEEDS, UK LS27 7LE
T: [phone] | F: [phone] | [e-mail]
commercial grade 9 port gigabit managed Ethernet switch
with (7) 10/100/1000TX + (2) gigabit combo SFP ports
ComWorx VL
CWGE9MS
software features, cont’d
Bandwidth Control
Support ingress packet filter and egress packet
limit
The egress rate control supports all of packet type
and the limit rates are 100K~250Mbps
Ingress filter packet type combination rules are
Broadcast/Multicast/Unknown Unicast packet,
Broadcast/Multicast packet, Broadcast packet only
and all of packet. The packet filter rate can be set
from 100k to 250Mbps
Flow Control Support Flow Control for Full-duplex and Back
Pressure for Half-duplex
System Log Support System log record and remote system log
server
SMTP Support SMTP Server and 6 e-mail accounts for
receiving event alert
SNMP Trap Up to 3 Trap stations
Cold start, Port link up, Port link down,
Authentication Failure, Private Trap for power
status, X-ring topology change
DHCP Provide DHCP Client/ DHCP Server
DNS Provide DNS client feature and support Primary
and Secondary DNS server.
SNTP Support SNTP to synchronize system clock in
Internet
Firmware Update Support TFTP firmware upgrade, TFTP backup and
restore.
Configuration upload and download
Support binary format configuration file for system
quick installation
Commercial Grade Managed Ethernet Switch with (7) 10/100/1000TX + (2) Gigabit Combo SFP Ports
PART
NUMBER
CWGE9MS
DESCRIPTION
OPTIONAL
Side-by-Side Rack Mount Bracket Adaptor Kit – with mounting hardware (Optional, order model RMB-3)
Rack Mount Bracket Adaptor Kit – with mounting hardware (Optional, order model RMB-2)