System information

60
 Context Match Rule: select the context match rule.
 Read View Name: set up the read view.
 Write View Name: set up the write view.
 Notify View Name: set up the notify view.
 Select to add context name.
 Select to remove unwanted context name.
MIB view Table
Configure MIB view table.
 View Name: set up the name.
 Sub-Oid Tree: fill the Sub OID.
 Type: select the type – exclude or included.
 Select to add context name.
 Select to remove unwanted context name.
QoS Configuration
You can configure Qos mode, 802.1p priority [7-0] setting, Static Port Ingress Priority
setting and TOS setting.
 Select the Qos Mode: Select the Qos policy rule
 Disable QoS Priority: The default status of Qos Priority is disabled.
 High Empty Then Low: When all the high priority packets are empty in queue,
low priority packets will be processed then.
 Highest:SecHigh:SecLow:Lowest:8:4:2:1: The switch will follow 8:4:2:1 rate
to process priority queue from Highest to lowest queue.
 Use an 8,4,2,1 weighted fair queuing scheme: The switch will follow 8:4:2:1 rate