System information

35
User Authentication interface
Advanced Configuration-Broadcast Storm Filter
This page enables user to select the filter packet type. All the packet types filtering
conditions could be selected at the same time.
1. Flooded Unicast/Multicast Packets: When this check box is marked, the switch will
filter the packet type of Flooded Unicast/Multicast.
2. Control Packets: When this check box is marked, the switch will filter the packet
type of Control.
3. IP Address Multicast Packets: When this check box is marked, the switch will filter
the packet type of IP Address Multicast.
4. Broadcast Packets: When this check box is marked, the switch will filter the packet
type of Flooded Unicast/Multicast.
5. Broadcast Storm Rate: User can set the filtering rate range from 1/2 of ingress to
1/16 of ingress.
6. And then, select