System information

31
SNTP Configuration
You can configure the SNTP (Simple Network Time Protocol) settings. The SNTP allows
you to synchronize switch clocks with the Internet.
1. SNTP Client: enable or disable SNTP function to get the time from the SNTP server.
2. Daylight Saving Time: enable or disable daylight saving time function. When
daylight saving time is enabled, you need to configure the daylight saving time period.
3. UTC Time zone: set the switch location time zone. The following table lists the
different location time zone for your reference.
Local Time Zone

Conversion from UTC

Time at 12:00 UTC

November Time Zone - 1 hour 11am
Oscar Time Zone -2 hours 10 am
ADT - Atlantic Daylight

-3 hours

9 am

AST - Atlantic Standard
EDT - Eastern Daylight

-4 hours

8 am

EST - Eastern Standard
CDT - Central Daylight

-5 hours

7 am

CST - Central Standard
MDT - Mountain Daylight

-6 hours

6 am

MST - Mountain Standard
PDT - Pacific Daylight

-7 hours

5 am

PST - Pacific Standard
ADT - Alaskan Daylight

-8 hours

4 am

ALA - Alaskan Standard

-9 hours

3 am

HAW - Hawaiian Standard

-10 hours

2 am
