Manualshelf

System information

ManualsBrandsComnet ManualsComputer equipmentCWGE2FE24MODMS
31323334353637383940
29
System Event Log - Event Configuration
You can select the system log events and SMTP events. When selected events occur, the
system will send out the log information. Also, per port log and SMTP events can be
selected. After configure, Select .
System event selection: 4 selections – Device cold start, Device warm start, SNMP
Authentication Failure, and X-ring topology change. Mark the checkbox to select the
event. When selected events occur, the system will issue the logs.
Device warm start: when the device executes warm start, the system will issue
a log event.
Authentication Failure: when the SNMP authentication fails, the system will
issue a log event.
Port event selection: select the per port events and per port SMTP events. It has 3
selections – Link UP, Link Down, and Link UP & Link Down. Disable means no event
is selected.
Link UP: the system will issue a log message when the port connection is up
only.
Link Down: the system will issue a log message when the port connection is
down only.
Link UP & Link Down: the system will issue a log message when the port
connection is up and down.