System information

11
Rack-mounted Installation
The CWGE2FE24MODMS switch comes with a rack-mounted kit and can be mounted in
an EIA standard size, 19-inch Rack. The switch can be placed in a wiring closet with other
equipment.
Perform the following steps to rack mount the switch:
A. Position one bracket to align with the holes on one side of the switch and secure it
with the smaller bracket screws. Then attach the remaining bracket to the other side
of the switch.
Attach mounting brackets with screws
B. After attaching both mounting brackets, position the switch in the rack by lining up the
holes in the brackets with the appropriate holes on the rack. Secure the switch to the
rack with a screwdriver and the rack-mounting screws.
Mount the Switch in 19” Rack