Specifications

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 90
INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS
TECH SUPPORT: 1.888.678.9427
Event Selection
SYSLOG is the warning method supported by the system. Click on the dropdown selection to
enable system event warning.
System Warning – Event Selection interface
The following table describes the labels in this screen.
Section Description
System Event
System Cold Start Alert when system restart
Power Status Alert when a power up or down
SNMP Authentication Failure Alert when SNMP authentication failure.
Redundant Ring Topology Change Alert when C-Ring topology changes.
Port Event
SYSLOG Disable
Link Up
Link Down
Link Up & Link Down
Save Activate the configurations.
Reset Clear your changes without saving.