Specifications

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 71
INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS
TECH SUPPORT: 1.888.678.9427
ACL
Ports
Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames
received on a port unless the frame matches a specific ACE.
Label Description
Port The logical port for the settings contained in the same row.
Policy ID Select the policy to apply to this port. The allowed values are 1 through 8. The default
value is 1.
Action Select whether forwarding is permitted (“Permit”) or denied (“Deny”). The default value
is “Permit”.
Rate Limiter ID Select which rate limiter to apply to this port. The allowed values are Disabled or the
values 1 through 15. The default value is “Disabled”.
Port Copy Select which port frames are copied to. The allowed values are Disabled or a specific
port number. The default value is “Disabled”.
Logging Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is “Disabled”. Please note that the System Log memory size and
logging rate is limited.
Shutdown Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is “Disabled”.
Counter Counts the number of frames that match this ACE.