Specifications

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 7
INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS
TECH SUPPORT: 1.888.678.9427
Hardware Installation
1
2
547 3
6
CWGE28FX4TX24MS Front Panel
The following table describes the labels that are on the CWGE28FX4TX24MS switch
Port Description
Gigabit SFP ports 4 × 1000Base-X on SFP port
Gigabit Ethernet Port 24 × 10/100/1000Base–T(X)
Console Use RS-232 with DB9 connecter to manage switch.
1. Console port (DB9 Female connector)
2. 10/100/1000Base-T(X) gigabits Ethernet port
3. 1000Base-X Fiber port on SFP port
4. LED for Ethernet ports Link/Act status: Left Green for 1000Mbps indicator, Amber for
10/100Mbps indicator
5. LED for Ethernet ports Duplex status.
6. LED for SFP ports Link/Act status.
7. Front panel Indicating LEDs:
› STA: Solid Green indicates that the system is ready. The LED is blinking when the system is
upgrading firmware
› PWR: The LED lights on when the power module is activated.
› R.M.: (Ring Master). When the LED light is on, the switch is the ring master of Ring.
› Ring: When the LED light is on, it means the C-Ring is activated.
› DEF: System resets to default configuration.
› Ping: System is processing “PING” request.
› RUN: System is operating continuously.
› RMT: System is accessed remotely.