Specifications

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 55
INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS
TECH SUPPORT: 1.888.678.9427
Private VLAN
The Private VLAN membership configurations for the switch can be monitored and modified here.
Private VLANs can be added or deleted here. Port members of each Private VLAN can be added
or removed here. Private VLANs are based on the source port mask, and there are no connections
to VLANs. This means that VLAN IDs and Private VLAN IDs can be identical.
A port must be a member of both a VLAN and a Private VLAN to be able to forward packets. By
default, all ports are VLAN unaware and members of VLAN 1 and Private VLAN 1.
A VLAN unaware port can only be a member of one VLAN, but it can be a member of multiple
Private VLANs.
Label Description
Delete Check the box next to an ID to delete the entry. It will be deleted during the next save.
Private VLAN ID Indicates the ID of this particular private VLAN.
MAC Address The MAC address for the entry.
Port Members A row of check boxes for each port is displayed for each private VLAN ID. To include a
port in a Private VLAN, check the box. To remove or exclude the port from the Private
VLAN, make sure the box is unchecked. By default, no ports are members, and all
boxes are unchecked.
Adding a New
Static Entry
Click Add a New Private VLAN to add a new private VLAN ID. An empty row is added
to the table, and the private VLAN can be configured as needed. The allowed range
for a private VLAN ID is the same as the switch port number range. Any values outside
this range are not accepted, and a warning message appears. Click OK to discard the
incorrect entry, or click Cancel to return to the editing and make a correction.
The Private VLAN is enabled when you click Save.
The Reset button can be used to undo the addition of new Private VLANs.