Specifications

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 32
INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS
TECH SUPPORT: 1.888.678.9427
LACP Port Configuration
This page allows the user to inspect the current LACP port configurations, and change as
required.
.
.
.
Label Description
Port Indicates the group ID for the settings contained in the same row. Group ID “Normal”
indicates there is no aggregation. Only one group ID is valid per port.
LACP Enabled Each switch port is listed for each group ID. Select a radio button to include a port in
an aggregation, or clear the radio button to remove the port from the aggregation. By
default, no ports belong to any aggregation group. Only full duplex ports can join an
aggregation and ports must be in the same speed in each group.
Key The key value incurred by the port, range 1-65535. The Auto setting will set the key
as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3. Using the
specific setting, a user-defined value can be entered. Ports with the same key value can
participate in the same aggregation group, while ports with different keys cannot.
Role The role shows the LACP activity status. The active will transmit LACP packets each
second, while passive will wait for a LACP packet from a partner (communicate if
communicated to).
Save Save changes.
Reset Click to undo any changes made locally and revert to previously saved values.