Specifications

INS_CWGE28FX4TX24MS_REV– 08/31/12 PAGE 29
INSTALLATION AND OPERATION MANUAL CWGE28FX4TX24MS
TECH SUPPORT: 1.888.678.9427
Rate Limit
Configure the switch port rate limit for traffic policing and shaping on this page.
.
.
.
Label Description
Port The logical port for the settings contained in the same row.
Traffic policing
Enabled
Enable or disable the port traffic policing. The default value is “Disabled”.
Traffic policing
Rate
Configure the rate for the port traffic policing. The default value is “500”. This value is
restricted to 500-1000000 when the “Traffic policing Unit” is “kbps”, and it is restricted
to 1-1000 when the “Traffic policing Unit” is “Mbps”
Traffic policing
Unit
Configure the unit of measure for the port traffic-policing rate as kbps or Mbps. The
default value is “kbps”.
Shaper Enabled Enable or disable the port shaper. The default value is “Disabled”.
Shaper Rate Configure the rate for the port shaper. The default value is “500”. This value is restricted
to 500-1000000 when the “Traffic policing Unit” is “kbps”, and it is restricted to 1-1000
when the “Traffic policing Unit” is “Mbps”
Shaper Unit Configure the unit of measure for the port shaper rate as kbps or Mbps. The default
value is “kbps”.
Save Save changes.
Reset Click to undo any changes made locally and revert to previously saved values.